Delta Leonardo Single-Bike Rack Review

Delta Leonardo Single-Bike RackThe verticle bike rack works great.Holds my bikes securely...and saves garage storage space.After looking at all the bike storage solutions...this is the best choice.Those gravity bike racks eat up too much garage space as the bikes are still horizontal.Hanging it from the ceiling is not good as it sways and not all that secure.Bike rack on the ground is not good as it is just as good as using a kickstand.

I was able to mount two bikes to the wall...where the two racks are 15" apart.Total space used for both bikes is less than three feet.

After looking at other vertical racks...this is the most well constructed.

Click Here to see more reviews about: Delta Leonardo Single-Bike Rack

Product Description:
Store your bike easily and with a bit of panache with the stylish, curvy Delta Leonardo wall-mounted single bike rack. Elegantly designed with a silver finish, it's perfect for storing a bike in space-limited apartments or in the back hall. The Leonardo holds the front wheel with a rubber coated arm. It conveniently accommodates any wheel size--from touring to phat, chunky mountain tires--and can hold a maximum load of 40 pounds. It should be mounted to a wall stud. It comes with installation hardware, printed instructions, and a lifetime guarantee against defects.
About Delta Cycle
For more than 20 years, Delta Cycle has created useful cycling products with a mission to make an innovative difference. The company works hard to make their products better and deliver superior value. Delta Cycle offers only a small, concentrated product line that represents the best there is in each category.


Buy cheap Delta Leonardo Single-Bike Rack now Get 7% OFF

Swagman Hang It Bike Hanger Review

Swagman Hang It Bike Hangernot too bad. Its really really easy to install, ships super fast. Only complaint I have is that the angle tighteners do not tighten the whole way, so basically they just rotate and the bike balences on them. I was not aware of this when I bought it. It looks good and is pretty sturdy. No problem holding two bikes, there's more than enough room. Just having the actual bike holder part not tighten is a upsetting.

Click Here to see more reviews about: Swagman Hang It Bike Hanger

Product Description:
Swagman 80690 Hang It 2 Bike Hanger accommodates up to two bikes for convenient storage. The Hang It 2 can be set at a maximum height of nine-feet to brace against the floor and ceiling. The bike hooks are height-adjustable to accommodate a variety of bike sizes and styles and the Hang It 2 is designed for easy set-up and take-down.


Buy cheap Swagman Hang It Bike Hanger now Get 29% OFF

Swagman 3 Bike Stand Review

Swagman 3 Bike StandI have several kids, and their bikes were always laying around where they shouldn't be before I bought this stand.

This stand is very lightweight, but is of good quality and holds all sizes of bike just fine.Great value for the price.The only downside is that the stand tends to move a bit when the bike is pushed into it.

If you have more $$$ to spend, I would recommend a stand made of heavier material that won't move as easily. Otherwise, no complaints whatsoever.

Click Here to see more reviews about: Swagman 3 Bike Stand

Product Description:
The bike rack is easy to load and accomodates all styles of bike.It is expanadable in multiples of three.It is a snap together design, weighs 8.5lbs and dimensions are 14"x46"x14" high.

Buy cheap Swagman 3 Bike Stand now Get 10% OFF

Delta Michelangelo Two-Bike Gravity Stand Review

Delta Michelangelo Two-Bike Gravity StandI use this rack in my apartment to keep my bikes away from rain and thieves.I like that this rack requires no wall-drilling and keeps bikes flat against the wall (rather than sticking out like those racks that hang bikes by their front wheels.)I'm very impressed with its stability, considering the rack itself is pretty light.There's only one contact point with the wall, which has a big, rubber end (like the two feet) so it won't scratch or mark.The feet stick to my carpeted floor quite securely, and my guess is that they'd work well on noncarpeted surfaces, too.The hooks that hold up your bike have a generous, rubbery coating, so they won't scratch up your frame.I keep two bikes on the rack, with my regular commuter on the lower one, and the rack is quite stable, even when only the upper bike is on it.For those of you who care, the rack is manufactured in China, so I'm sure Delta's making a fortune, but I had lots of trouble finding a U.S.-made alternative.

Click Here to see more reviews about: Delta Michelangelo Two-Bike Gravity Stand

Product Description:
Store your bikes out of the way and keep your floor free from clutter with the ingenious Delta Michelangelo dual bike stand. Because it relies on gravity and requires no drilling into the walls, it's a great choice for apartments and homes. It leans against the wall and has rubber-tipped legs that keep it in place on the floor. The independently adjustable arms can accommodate any style bike. It can hold a maximum of 100 pounds (50 pounds per bike). Perfect for any indoor environment, this stylish rack features a silver epoxy powdercoat. It's easy to assemble and comes with required hardware, printed instructions, and a lifetime guarantee against defects.
About Delta Cycle
For more than 20 years, Delta Cycle has created useful cycling products with a mission to make an innovative difference. The company works hard to make their products better and deliver superior value. Delta Cycle offers only a small, concentrated product line that represents the best there is in each category.


Buy cheap Delta Michelangelo Two-Bike Gravity Stand now Get 27% OFF

Racor Pro PSB-1R Single Folding Bike Rack Review

Racor Pro PSB-1R Single Folding Bike RackUsed this product to hang two adult bikes horizontally on garage wall. Used 3 long wood screws into stud to mount the holder on finished garage wall. shelf worked well for two helmets. Got the bikes off the ground and was able to pull another car into the gargage.Would recommend.

Click Here to see more reviews about: Racor Pro PSB-1R Single Folding Bike Rack



Buy cheap Racor Pro PSB-1R Single Folding Bike Rack now Get 48% OFF

Racor PBH-1R Ceiling-Mounted Bike Lift Review

Racor PBH-1R Ceiling-Mounted Bike LiftI received two of these bike lifts as gifts. I installed them to replace my old "hooks-in-the-ceiling" method of hanging bicycles over my car. I had to take care to measure the height of the bicycle (adding a few inches for the pulleys) to ensure they cleared the car. I also measured the length of the bicycle to ensure it wouldn't be in the way of people walking around the car. Finally, I measured between the handlebars and seat so the pulleys were properly spaced. But once that was done, installation was a simple matter of drilling three pilot holes per pulley in a joist and screwing them in.

Although the instructions say to tie a stop knot in the rope and thread it through the pulleys and hooks before installation, it's easier not to do that until after you've installed the pulleys. (I did tie a knot in the rope and run it through the hole before I installed the first pulley, but that that turned out not to be necessary because there's enough clearance to push the rope through afterwards.)

Finally, I installed the cleats low enough to reach but high enough so people don't have to duck under the rope.

Like some of the other reviewers, one of my ropes was frayed. (The other one was fine.) I wrote an e-mail to Racor and a vice-president responded almost immediately. I received a replacement rope two days later. Awesome!

Conclusion: These lifts work very well, are easy to install, are reasonably priced, and are backed by excellent customer service.

Click Here to see more reviews about: Racor PBH-1R Ceiling-Mounted Bike Lift

Product Description:
The RacorPro PBH-1R Ceiling-Mounted Bike Lift allows you to take advantage of unused ceiling space to store your bike. Installation takes only a matter of minutes, and with its ingenious pulley system, raising and lowering your bike couldn't be easier. The lift lets you free up precious storage space on the floor, all while keeping your bike stored away safely until you're ready to ride.
The RacorPro PBH-1R Ceiling-Mounted Bike Lift:

    Installs easily in just minutes.
    Employs solid-steel construction for exception durability.
    Makes it simple to raise and lower your bike.
    Frees up floor space in your home.





Create more floor space in your home by getting your bike off the ground. View larger.

The RacorPro PHL-1R takes only minutes to install. Easy-to-Install Pulley System Frees up Floor Space
The PBH-1R uses a pulley system that makes it easy to raise and lower bikes weighing up to 50 pounds. The system can be installed on ceilings as high as 14 feet, and the unique rope locking system ensures that the rope stays locked in place when not in use. Storing your bike off the floor not only protects your bike from damage, but it frees up valuable floor space, helping to keep your space tidy and better organized.
Installing the Racor PBH-1R is a breeze, and you can have it completed within a matter of minutes. The only tools necessary for installation are a Phillips head screwdriver, a drill with a 1/8" bit, a tape measure, and a stud finder (for ceilings with drywall). The easy-to-follow instructions will have your Ceiling-Mounted Bike Lift ready to go in just five easy steps.
Solid-Steel Construction for Durability
The PBH-1R is built to last. All of its included hardware is constructed from solid steel for maximum durability and toughness. The locking mechanism, pulleys, rope cleat, and lift mechanism offer smooth performance for years to come. The included 48-foot lift rope is also extremely durable, and it provides plenty of excess length for ceilings up to 14-feet high.
Easy Raising and Lowering with Minimal Effort
The PBH-1R makes it a breeze to raise and lower your bike from its ceiling-mounted position. The pulley system handles the brunt of the force, so it requires very little effort on your part. Simply hook the bike handlebar and seat to the included hooks and pull the lift rope to raise the bike to its ceiling-mounted storage position. With each pull, the locking mechanism locks into place to eliminate accidental drops. Store the excess rope on the included rope cleat to keep it nice and tidy.
The RacorPro PBH-1R Ceiling-Mount Bike Lift measures 10.24 x 5.12 x 3.5 inches (packaged) and weighs just 3.64 pounds (packaged). All included components feature a black finish.
What's in the Box
Two lift assemblies, two hook pulleys (one with locking mechanism), 48-foot rope, one rope cleat, 10 two-inch wood screws.


Buy cheap Racor PBH-1R Ceiling-Mounted Bike Lift now Get 55% OFF

Delta Leonardo Single Bicycle Rack with Da Vinci Tire Tray Review

Delta Leonardo Single Bicycle Rack with Da Vinci Tire TrayThe item description is misleading. I have a mountain bike - Raleigh Mojave 5.0 and this rack does NOT accommodates the tires. The top rack is design to tilt at a slight angle to hold the tire firmly but it is not tilted enough to accomodate my regular mountain bike's tire. Eventually I have to bent the hook down in order to muscle my tire onto the hook. But it was a pipe construction so the structure integrity is compromised this way (you don't really want to bent the metal pipe and expect it to hold the same weight). If you have a "phat, chunky mountain tires", DO NOT BUY THIS ITEM. Guarantee you'll regret it.

Click Here to see more reviews about: Delta Leonardo Single Bicycle Rack with Da Vinci Tire Tray

Product Description:
Store your bike easily and with a bit of panache with the stylish, curvy Delta Leonardo wall-mounted single bike rack. Elegantly designed with a silver finish, it's perfect for storing a bike in space-limited apartments or in the back hall. The Leonardo holds the front wheel with a rubber coated arm. It conveniently accommodates any wheel size--from touring to phat, chunky mountain tires--and can hold a maximum load of 40 pounds. It should be mounted to a wall stud. It comes with installation hardware, printed instructions, and a lifetime guarantee against defects.
About Delta Cycle
For more than 20 years, Delta Cycle has created useful cycling products with a mission to make an innovative difference. The company works hard to make their products better and deliver superior value. Delta Cycle offers only a small, concentrated product line that represents the best there is in each category.


Buy cheap Delta Leonardo Single Bicycle Rack with Da Vinci Tire Tray now Get 10% OFF

RAD Cycle Products Ceiling Mount Bike Hoist - Bicycle Hoists Review

RAD Cycle Products Ceiling Mount Bike Hoist - Bicycle HoistsWe researched a lot of similar products via online reviews, settling on this one as having the greatest likelihood of highest quality / best price and WE ARE VERY PLEASED.

Here are some key things we'd like you to know:

1.It takes some time to get these things mounted right, so just plan on it... you need to string the rope through the 4 pieces and pulleys just so, mount them on joists just so, and ensure the distance between the two pieces is just right for your bike.We recommend at least two people, chips and salsa, and perhaps a coors light ;)

2.You can mount several bikes fairly close together if you offset the handlebars a bit forward and back among the mounts so that the handlebars never "share the same space."We bought 5 of these bike hoists and mounted them to run parallel to the joists spaced at 24" for mounting 5 bikes, one bike on each of five different joists mounted side-by-side.My husband used long screws from the hardware store rather than the hardware included in the package so he could securely screw through the drywall and further into the wood joists.

3.It is important that the BACK tire go toward the wall where the rope coming out of the brake will be cleated.The whole rope and braking mechanism works so well this way ... if you put the handlebars on the wall side like the picture for this product, then the handlebars block you moving the rope to operate the brake (trust, trust, trust me on this).If you put the back tire to the wall, the rope moves freely :)By the way, the braking mechanism in the pulley seems so sturdy you might choose not to mount/use the cleat, but it does feel safer to us to use it.

4.The distance between the ceiling and the bike will not be related to how far up the handlebars or the seat stick up ... it will be the length of the hardware above where it hooks on -- this may be important to you if you are mounting above a car and top-to-bottom distance matters.We mounted three of our bikes above a mini-van roof (the other two in front) and it was important to choose the lower profile bikes as not all of the bikes would have fit directly above the van.The "first bike" in line (at the front of the van) can be raised and lowered while the van is parked in the garage so that's a great location for whichever bike you'll be riding most frequently *or* for the bike of a kid not old enough to move the car in order to get his/her own bike down ;)

5.On arrival, the instructions said the mounts would hold 100 pounds (which is more than we had read here online).Our tandem bike fully equipped is just under 50 pounds and seems very secure and happy.

6.These are designed for the top rounded section of the lower hook assembly to fit into the rounded-out section of the ceiling mounted pulleys.The hook assembly will only fit into the ceiling assembly if the two pieces mounted on the ceiling are spaced EXACTLY to fit the specific bike where the hooks will grab the seat and handlebars.You'll be much more pleased if you take the time to get this spacing right (you can tell by letting the hooks hang down while you are choosing the mounting position ~ gravity will allow the ropes to work as a plumb line :)

7.Our thoughts relative to the complaints you might read about this product ... A.The rope has been fine, no fraying or other problems.B.The "hook" ends could be hook-ier without a doubt, although we've not encountered any problems with them (perhaps because we don't live in earthquake zones and we don't move with great haste :)C.Sometimes the front or back of the bike will raise or lower faster than the other end -- when this happens we simply grab the lowest tire and give it a boost up to level it which happens quickly and then it stays level for the rest of the up or down operation so it's never been a big concern.D.We mounted each bike directly into one joist (i.e., parallel/directly below one joist and not perpendicular between two joists) thus there was no need / benefit of mounting the brackets to a 2x4 first and then mounting the 2x4 to the ceiling -- we just mounted straight into the ceiling.

8.If you are going to cut the rope shorter, only do so when the bike is in the down position ... once the bike is lowered, this cool contraption uses a lot of rope!

9.Everyone in the family can operate these hoists easily -- they are so much safer and usable than the stationary hooks we used to have that involved lifting heavy bikes on and off.Also, if you leave the kickstand down as you put your bike up, then when you lower the bike on the pulley later, it will land ready to go :)

10.An unexpected benefit (beyond the extra garage space which we were hoping for) has been that all of us ride our bikes much more often than we used to.Putting the bikes up and getting them down is so easy that it has brought back a lot of frequency and joy to our bike riding experience.

April 2010 Update ~ Still using them and still loving them :)

Bon Appetit!

Click Here to see more reviews about: RAD Cycle Products Ceiling Mount Bike Hoist - Bicycle Hoists

Product Description:
Reclaim your garage! Featuring thick ropes for durability, the RAD Easy Bike Hoist lets you store your bike overhead, so it won't clutter up your home, garage, or storage space. This ceiling-mounted bike hoist is designed for ceilings up to 12 feet. It keeps your bike safely up and out of the way, and it also makes your bike easy to access when you're ready for your next ride. Built to perform flawlessly, the RAD Easy Bike Hoist is backed by a lifetime limited warranty.
RAD Easy Bike Hoist

    Smooth pulleys and latches make it easy to lift your bikeInnovative lift brake prevents unwanted release


    Equipped with thick rope for durability, fit, and finish


    Rubber-coated hooks protect bikes from scratches


    Heavy-duty, 100-pound load limit


    Fits all bikes: children's, mountain bikes, tandems, road bikes, and incumbents


    Lifetime limited warranty

An advanced rope-locking mechanism prevents unwanted release. View larger.
Adjustable hooks let you hoist bikes and other items off the floor and out of your way. Lifts Easily to Save Space
With the RAD Easy Bike Hoist, you'll have a place for your bike and access to all the space you've been missing in your garage or storage space. Smooth pulleys and latches make it easy to lift your bike up to the ceiling, while an innovative rope-locking mechanism keeps your bike safe and secure from unwanted release.
Robust Engineering for Durability
The RAD Easy Bike Hoist can hold the heftiest bicycles. With a load limit of up to 100 pounds, this mounting system features robust engineering for smooth lifting that doesn't put excessive strain on your hands or back. The thick rope will resist fraying, keep your bike steady and secure, and last a lifetime. The rubber-coated hooks will prevent scratching, and the advanced braking system will provide peace of mind--you'll know that once your bike is hoisted and locked, it will stay secure.
Easy Installation and Operation
Installing the RAD Easy Bike Hoist is fast and easy. You can mount the hoist on a two-by-four and screw the two-by-four to a joist, or you can mount the hoist directly to the joist itself.
And using the hoist is just as simple--attach the clamps to the handlebars and seat, and you're ready to comfortably lift your bike up to the ceiling. Once the locking mechanism clicks in, wrap the rope around the included wall mount to keep your bicycle secure. When it's time to get your bike down, simply unlock the mechanism and use the rope to smoothly bring it to the ground.
The RAD Easy Bike Hoist is backed by a lifetime limited warranty.
What's in the Box
Two hoist brackets with integral pulley system, two rubber-coated hoist hooks with pulley, one wall-mounting cleat, one nylon rope, ten mounting screws, and instruction manual.


Rubber-coated hooks attach to the seat and handlebars without creating scratches.


Buy cheap RAD Cycle Products Ceiling Mount Bike Hoist - Bicycle Hoists now Get 73% OFF

Racor PBS-2R Two-Bike Floor Bike Stand Review

Racor PBS-2R Two-Bike Floor Bike StandI've had this stand for over a year now. Took about five minutes to get it together. Held my 26" mountain bike just fine. I recently bought a new 26" MTB with disc brakes. The good news is that the disc rotors 'just barely' clear the support arms on this stand. You do have to futz with the bike's position on the stand a bit or the bike will 'lean' slightly on the rotor, but it isn't that hard to make it work. The bad news is that the support arm pairs are too close together to allow two mountain bikes of the same frame size to coexist peacefully in the same orientation. With front wheels inserted into the frame the handlebars clash big time. It works better if one bike has the front wheel in the frame and the other the rear wheel. The handlebar of one bike will still contact the seat of the other bike, but a simple turn of the handlebar on the outward-facing bike fixes this. This stand was obviously designed for two road bikes side-by-side, not MTBs. It would probably also be OK with two bikes of different frame sizes. Other than that, though, it's plenty sturdy and works well.

Click Here to see more reviews about: Racor PBS-2R Two-Bike Floor Bike Stand

Product Description:
With the rise in popularity of expensive bicycles, storage and safety have become an issue. Bikes stored one on top of the other in a garage or hanging from a ceiling can be dangerous for small children or can fall and damage not only the bike, but an expensive automobile or truck. The PBS-2R Racor Bike Stand will securely store two bikes in either direction and can be used indoors or can be secured outside the home to safely store your bikes. The Stand is easy for children to use and the tubular steel construction with its durable epoxy finish will give you many years of dependable service. --C. Dwight Barnett

Buy cheap Racor PBS-2R Two-Bike Floor Bike Stand now Get 33% OFF

Racor Pro PLB-2R Two-Bike Gravity Freestanding Bike Stand Review

Racor Pro PLB-2R Two-Bike Gravity Freestanding Bike StandI've been wanting a bike rack like this for years. I've tried products that seemed similar, and they just didn't work for me. This one's exactly what I was looking for.
APPEARANCE
The rack arrived with no scratches. This was a surprise, given that two of the sections that make up the vertical post were loose in the manufacturer's box, and the box was a bit battered.
The rack itself looks great in my garage.
STABILITY
When positioned against (or near) a wall, the rack sways mildly when a bike is removed or replaced. The base is big enough and the overall design is such that removing the bottom bike (gently) doesn't seem to cause the whole thing to fall over--as long as the wall is there for backup. The manufacturer recommends anchoring the rack to the wall and includes hardware for this purpose.
ASSEMBLY
The central post is delivered in three sections: The base is the curved"T" that you can see in the picture on the Amazon site. The other two sections form the vertical tube.
These main sections fit very tightly together. As far as I'm concerned, this makes the whole thing more internally stable. To assemble the central post, I relied on a many squirts from my trusty can of WD-40, some wiggling, gravity, and patience. Without all that, I would've been stuck (and the sections would've been too).
The four arms that hold the two bikes attach into slots on either side of the vertical tube. I used a small block of wood to knock the arms in and out of the slots (I don't have a mallet, and it seemed like a hammer would dent/scratch the finish). Each bike is held by resting the top tube in cradles (at the end of each arm). The cradles easily rotate as needed to adapt to the angle of the top tube. Nice touch.
It definitely took some effort to put this rack together. However, I'm pleased with the results so far. It really frees up space! Taking it apart will be an interesting challenge some day.
Is it worth the price? Well... Even with the Amazon price, it seems a bit more expensive than other garage-quality bike racks. However, over the years I've spent more in total on other racks that didn't work out for me at all. This one is just what I wanted!

Click Here to see more reviews about: Racor Pro PLB-2R Two-Bike Gravity Freestanding Bike Stand

Product Description:
Efficient vertical storage reclaims valuable floor space. Tired of the traffic jam in your garage The freestanding Garage Bike Stand is by far the simplest and safest way to store your bikes and free up garage space. No bolts, screws or fasteners required! Plus, it assembles in minutes without tools. Just place the Garage Bike Stand against a wall and instantly start saving space. Lightweight enough for easy moving, yet sturdy enough to support your bikes safely. The Garage Bike Stand weighs just 20 lbs., so it can be easily repositioned as needed. Independent adjustment arms provide level bike storage to help ensure stability. Features a durable epoxy-coated black finish and vinyl-coated bike cradles and base that help protect your bikes and the floor from scratches and scuffs. Assembled stand measures 26" w x 19" d x 79" h. Enjoy compact, secure bike storage with the Garage Bike Stand from Brookstone. Order today!

Buy cheap Racor Pro PLB-2R Two-Bike Gravity Freestanding Bike Stand now Get 49% OFF